Finish nailers make jobs easier

Back when I was first a carpenter, cut very expensive and rare nailers. Then, about 20 years ago, the price went down and I decided to give them a try. As expected, they’ve nailed faster and a lot easier on my arm. But as I have learned to use them, they also perform their jobs faster, easier and better in many ways I did not expect. Here are some tips and benefits that make nailers cut an essential part of my daily work.

Finish nailers make jobs easier

NAILER SAFETY

In a flash, a nailer can shoot a 2 in.-long nail into anything in its path. Injuries can be just as fast. I can tell stories of their own injury for an entire lunch hour. So I became a believer. Always wear eye and hearing protection. And remember that sometimes comes out nails courses, make a U-turn and came up where you do not expect them. So, keep your hands and your feet out of the reach of non-standard nails.

Which nailer does what?

Basic things

Trim nailers are classified according to the thickness or the “measure” of nails they shoot: The greater the number of measurements, smaller nails (it looks backward, right?). Nailers that shoot the biggest nail-15 and 16 gauge cut-often called “finish nailers.” Nailers 18-gauge, class called “brad nailers.” The smallest Nailer, 23-gauge, often called the “turban” or “micro turban.”

15-gauge finish nailer

This is the gun I used to get nailed for 3/4-in.-thick baseboard and trim large. It is also a good choice for more demanding jobs, such as nailing doorjambs or stair treads. These nailers have a large piston, and because the majority of additional, often angled magazine, so you can get into tight spots. Brand Name 15-gauge nailers, which handles nail length up to 2-1 / 2 in., Starting at less than $ 200.

16-gauge finish nailer

Like nailers 15-gauge, 16-gun most nail gauge shot up to 2-1 / 2 length and are suitable for heavy decorations. The main advantage of a 16-gauge gun is it smaller and lighter. If you want to buy a best finish nailer, I’d recommend 15-gauge guns bigger, simply because fat nail holding power supply. But some carpenters disagree with me. You pay the same brand name 16-gauge nails as you would for a 15-gauge gun.

18-gauge brad nailer

If you plan to buy a nail trim only, this is the size to get. I use mine more than all my others combined. It’s perfect for cutting standards, making furniture and the surrounding stores. Brad nailer model that shot up to 1-1 / 4 in. Is popular, but I recommend you spend a few bucks more for a gun that can handle up to 2 printed brads. Long. 2-in brand name. gun start under $ 100.

23-gauge pinner

This is the production we used the least. Those little legs just did not have enough strength to hold for most of the work. But do not get me wrong, there are times when the foot is perfect, especially for small parts nails. my turban, which cost less than $ 100, firing pins from 1/2 to 1 in. long. That’s long enough for most tasks, though sometimes I wish I had a model that can handle up to 2 feet in. Long, which would have cost $ 225 or more.

To read more about finish nailers performance, visit http://bradnailer24h.com/

Leave a Reply

Your email address will not be published. Required fields are marked *